Help with sizes of Perth Mint Lunar Gold Coins?

innerpath

innerpath

Active Member
Silver Stacker
Hi, I have a question about the actually sizes of the Perth Mint Gold Lunars when they are in their capsules.

Does any body know or could they measure the actually diameter of:

Perth Mint 1/10 oz Gold Lunar in Capsule (18.6 mm naked)?
Perth Mint 1/4 oz Gold Lunar in Capsule (22.6 mm naked)?
Perth Mint 1 oz Gold Lunar in Capsule (39.34 mm naked)?

Thanks
 
Thanks Alor, I actually found that link last night but I can't see where it gives the actually sizes of the coins in capsules?

It just gives the sizes/diameters of the coins themselves

but thanks for your link
 
innerpath said:
Hi, I have a question about the actually sizes of the Perth Mint Gold Lunars when they are in their capsules.

Does any body know or could they measure the actually diameter of:

Perth Mint 1/10 oz Gold Lunar in Capsule (18.6 mm naked)?
Perth Mint 1/4 oz Gold Lunar in Capsule (22.6 mm naked)?
Perth Mint 1 oz Gold Lunar in Capsule (39.34 mm naked)?

Thanks
Click to expand...


SI and SII are different. SII have larger capsules by its own.
The sizes are pretty much the same as the rest of PM capsules. They share other AU/AG capsules ie Kanga share with SI also with Kooks.
 
innerpath said:
Hi, I have a question about the actually sizes of the Perth Mint Gold Lunars when they are in their capsules.

Does any body know or could they measure the actually diameter of:

Perth Mint 1/10 oz Gold Lunar in Capsule (18.6 mm naked)?
Perth Mint 1/4 oz Gold Lunar in Capsule (22.6 mm naked)?
Perth Mint 1 oz Gold Lunar in Capsule (39.34 mm naked)?

Thanks
Click to expand...

Here's some of them...

S1 - 1oz = 37mm
S2 - 1oz = 43mm
S2 - 1/4oz = 25mm

My ruler doesnt do bees dicks so thats as close as I could measure.
 
he he he, thanks, that's great and close enough.

I realised I should of been more clear and said outer diameter of capsule because I want to purchase a storage tubes for them

Thanks Eureka Moments, that's just what I wanted

If somebody could tell me the outer diameter of the 1/10 oz Gold Lunar in the Capsule I will be done
 
Not that it helps but for 1/20 the mouse is in a different style cap from the others. Only one I have noticed so far can get a ruler out and measure tomorrow. Season two
 
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
 
Golden ChipMunk said:
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
Click to expand...

No need for bees dicks for you chip, just use your own.
 
Eureka Moments said:
Golden ChipMunk said:
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
Click to expand...

No need for bees dicks for you chip, just use your own.
Click to expand...

I see that how you measure yours. Pin head riding shot gun again.
 
Golden ChipMunk said:
Eureka Moments said:
Golden ChipMunk said:
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
Click to expand...

No need for bees dicks for you chip, just use your own.
Click to expand...

I see that how you measure yours. Pin head riding shot gun again.
Click to expand...
ouch EM .... i think chip is getting a hang of the aussie lingo :p:
 
I have a 1/4oz here, I can measure it with some calipers tomorrow if you want.

One question - do 1/4oz gold PM kangaroos usually rattle a tiny bit in the capsule (back and forward, not left to right)? It was a buyback, so it might not be the original capsule...
 
Golden ChipMunk said:
renovator said:
Golden ChipMunk said:
I see that how you measure yours. Pin head riding shot gun again.
Click to expand...
ouch EM .... i think chip is getting a hang of the aussie lingo :p:
Click to expand...

Keep adding salt n vinegar to his old wound??
. Thats enough said
Click to expand...
just when i thought you had a grip on aussie slang .... now i know it was just luck . Salt & vinegar goes with fish & chips not insults chip .Should have quit while you were ahead :(
 
Golden ChipMunk said:
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
Click to expand...

Sorry about dragging up an old thread but just in case anyone uses this for reference the 1/20 size can't be right if the coin diameter is 14.6mm.

Measuring with my bee I get :)

1/20 = 17.80mm
1/10 = 20.70mm
1/4 = 25.50mm
 
Junk Silver said:
Golden ChipMunk said:
1/20 - 9.48mm
1/10 - 20.64mm both for SII Lunars.
Caliper measurement. And its all over :P

Why would someone use bee to measure? Sell the xag make more mulla...
Click to expand...

Sorry about dragging up an old thread but just in case anyone uses this for reference the 1/20 size can't be right if the coin diameter is 14.6mm.

Measuring with my bee I get :)

1/20 = 17.80mm
1/10 = 20.70mm
1/4 = 25.50mm
Click to expand...

Internal or external diameter?

Looks like you have given the external diameter. *Someone are using the Airtite brand for replacement.
What I quoted is internal diameter. Yes there is a flaw there. Look like you have pick it up. :lol: after (5 months )
Research, research!!! Do your own....!!!

I have most of the capsules now for AU and Ag sizes. The older one are harder to come by.
@ Ample stocks level.
 
You must log in or register to reply here.
Back
Top